Repairs; Disposal - ITW SIMCO ION Performax IQ Easy Ex Mode D'emploi

10 Repairs

Warning:
- Disconnect the power supply before carrying out work on the unit.
- Work must only be carried out on the equipment by an electrical engineer with the
relevant training and qualifications and must be conducted in accordance with
national and local regulations.
Components from the Performax IQ Easy Ex and Performax IQ Easy Ex Speed cannot be
repaired. For ordering replacement parts see the list of replacement parts.
By problems or questions contact Simco-Ion or the local representative.
Simco-Ion provides advice on sending items for repairs as below.
Follow the procedure by visiting www.simco-ion.co.uk/repair/.
Ensure the anti-static bar is properly packed and be sure to clearly state the reason for return.
- For dismounting the anti-static bar: see chapter 5.6.

11 Disposal

At the end of its service life, do not throw the device away with the normal waste but
hand it in at an official collection point.
By doing so, you will help to protect the environment.
PerformaxIQEasyExPerformaxIQEasyExSpeed_UM_9752153510_NL_D_GB_F_V2_4
FR
93