ITW SIMCO ION Performax IQ Easy Ex Mode D'emploi page 81

Image 5.8.2.11: Wiring connection Performax Easy EX (Speed) with Status Module
(
PerformaxIQEasyExPerformaxIQEasyExSpeed_UM_9752153510_NL_D_GB_F_V2_4
For an EX-bar with cable without protective hose:
When needed: cut the cable to the desired length, strip
the cable according to figure 5.2.8.7 and mount proper
ferrules to the end of the wires.
Turn the gland in the Status Module and run the cable
through the gland. Tighten the clamp ring of the bolt for
good sealing and relief from straining.
Connect the cable according to the table below, place
the cover and screw tightly.
Colour:
Brown
White
Blue
Black
Yellow/green or grey
Connection: Number:
+ 24 V 1
A 2
0 V 3
B 4
Earth 5
80