Anti-Static Bar Mounting - ITW SIMCO ION Performax IQ Easy Ex Mode D'emploi

5.3 Anti-static bar mounting

Attention:
- Any conductive machine parts in the vicinity of the anti-static bar will negatively affect
its performance. For the best results the anti-static bar should be mounted in
accordance with Image 5.3.1
- Mounting the anti-static bar:
• Place just before the location where the static electricity problem occurs.
• Place with an optimal distance from the material that should be neutralized:
o 100 - 300 mm (Performax IQ Easy Ex)
o
50 - 300 mm (Performax IQ Easy Ex Speed)
• With the emitters in the direction of the material to be neutralized.
• Ensure that no material can come between the emitters and the material to be neutralized
Attach the cable properly into the machine to prevent mechanical damage (suitable hose
and clamps can be ordered separately).
Image 5.3.1: Optimal position Performax IQ Easy Ex and Performax IQ Easy Ex Speed
PerformaxIQEasyExPerformaxIQEasyExSpeed_UM_9752153510_NL_D_GB_F_V2_4
FR
73