Introduction - ITW SIMCO ION Performax IQ Easy Ex Mode D'emploi

1 Introduction

The Performax IQ Easy Ex and Performax IQ Easy Ex Speed static bars are designed to
neutralize electrostatically charged surfaces and may be used in certain hazardous areas (see
also Section 3, Safety).
The main difference between these two static bars is their recommended use;
The Performax IQ Easy Ex is suitable for general applications, the Performax IQ Easy Ex
Speed is suited for high web speeds, close to the material to be discharged.
Both static bars are equipped with an integrated high voltage power supply, emitters and a
status LED.
The Performax IQ Easy Ex and Performax IQ Easy Ex Speed are connected via a cable with 5
conductors to the IQ Easy platform. With the IQ platform the anti-static bar can be controlled
and read out centrally and remotely. Using the IQ Easy platform, the status of the bar can be
logged making quality management easier.
The Performax IQ Easy Ex is optimally deployed between 100 and 300 mm away from the
material at material speeds below 500 meters per minute and is available in effective lengths of
270 through to 2790 mm in increments of 180 mm.
For material speeds exceeding 500 meters per minute and / or material distances between 50
and 300 mm the Performax IQ Easy Ex Speed is recommended. This is available in effective
lengths from 90 through to 2790 mm, in increments of 60 mm.
Fixed connecting cable,
with protective hose
(standard) or without
protective hose
(optional).
Image 1.1: Connection side Performax IQ Easy Ex and Performax IQ Easy Ex Speed
PerformaxIQEasyExPerformaxIQEasyExSpeed_UM_9752153510_NL_D_GB_F_V2_4
Emitters
Status LED
Mounting bracket
FR
67