The anti-static bar will now ionize.
6.2 Selecting EXPERT mode for setting parameters or maintenance tasks.
In order to set parameters and carry out maintenance, you need expert user privileges. A
password may be required. For a detailed description, please refer to chapter 6.4 from the
Manager IQ Easy manual.
Once logged in at this user level, you will remain at this level until a new level is selected.
- Go to the main screen
- Enter the password and confirm with
the Manager, if no password is required.
- Click on
and go to the device to check or change the parameters by clicking on
behind the parameter or desired action.
- By clicking
you will return to the main screen.
6.3 Calibrating the Performax IQ Easy Ex through the IQ Easy Platform.
The anti-static bar should only be calibrated when:
- It is first commissioned,
- The position of the bar is changed
- Following cleaning.
Attention:
Make sure that the bar is mounted in the final position and that the conveyor or object to be
neutralized is in position but not moving (standing still).
.
- Go to user level expert section – see 6.2
- Go to the device menu by clicking
PerformaxIQEasyExPerformaxIQEasyExSpeed_UM_9752153510_NL_D_GB_F_V2_4
select settings
and choose expert.
or return directly to the system settings page of
FR
83