Anti-Static Bar Information Parameters (Expert Mode); Switching The Bar On/Off Remotely Through The Remote On/Off Input On The Manager Or Via Fieldbus (Expert Mode) - ITW SIMCO ION Performax IQ Easy Ex Mode D'emploi

Standby = Green, Running = Blue,
On the Main Screen:
With the parameter from the Manager: "Run state Color Green = Yes"
Standby = Blue, Running = Green, Warning = Yellow, Alarm = Red.
On the Main Screen:
If you do not want the bar to activate automatically after a power interruption or disconnection,
the autorun parameter has to be set to no in expert mode (6.2).
[ (n)x

6.6 Anti-static bar Information parameters (expert mode).

Should you require, various information parameters can be entered in order to make the
different devices more recognizable.
In such a case, adjust the parameters: Device name, Machine position, Mounting distance, Web
width, Web speed. These are information parameters neither the bar or the Manager will use for
calculations.
- Select the information page with the parameters to be changed by:
- [ (n)x
6.7 Switching the bar on/off remotely through the remote on/off input on the Manager or
via fieldbus (expert mode)
If desired, the bar can be switched on and off using the remote on/off input of the Manager or by
means of an instruction to the optional Fieldbus (see manual).
Using this, one machine control(PLC) can control several selected devices, including this bar,
by switching on/off at the same time, without any actions required by the operator.
To select this, the Remote on/off source parameter has to be changed from Continuous to
Remote or Fieldbus
- [ (n)x
PerformaxIQEasyExPerformaxIQEasyExSpeed_UM_9752153510_NL_D_GB_F_V2_4
Warning = Yellow, Alarm = Red.
"No" ]
Autorun
"parameter "enter name of value" confirm with
"Remote on/off source"
select Remote or Fieldbus ]
]
FR
87