Selecting Expert Mode For Setting Parameters Or Maintenance; Calibrating The Performax Easy Through The Iq Easy Platform - ITW SIMCO ION Performax IQ Easy Mode D'emploi

6.2 Selecting EXPERT mode for setting parameters or maintenance

In order to set parameters and carry out maintenance, you need expert user privileges. A
password may be required. For a detailed description, please refer to chapter 6.4 of the manual
Manager IQ Easy.
Once logged in at this user level, you will remain on this level until selecting a new user level.
- Go to the main screen
- Enter the password and confirm with
the Manager, if no password is required.
- Click and go to the device to check and/or change the parameters by clicking
behind the parameter or desired action.
- By clicking you will return to the main screen.

6.3 Calibrating the Performax Easy through the IQ Easy Platform

Bar calibration should be done in case of:
- The first commissioning,
- The position of the bar has been changed.
Note:
Make sure that the bar is mounted in the final position and that the conveyor or the object to be
neutralised is in position but not moving (standing still).
- Go to user level expert, see section 6.2.
- Go to the device menu by clicking
- Go to the Maintenance TAB
- Click Calibrate bar
PerformaxIQEasyPerformaxIQEasySpeed_UM_9752154110_NL_D_GB_FR_V1_5
, select settings
or return directly to the system settings page of
and choose expert.
.
GB
65