Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.5 Mounting the ionizer using existing mounting holes
There are several mounting holes on the ionizer allowing the ionizer to be mounted in different
ways.
M4 bolt, washer and nut (2x)
Image 5.2: Fixation using the existing mounting holes
- Mount the ionizer according to one of the steps shown in Figure 5.2. indicated possibilities.
- Connect the ionizer to the power cable and compressed air line
GB
BlowflexEasy_UM_9752161610_NL_D_GB_F_1.3
37
Publicité
Table des Matières
