Getting Started - Unpacking; Additional Accessories - Evolution FURY3 STEALTH 030-0006 Instructions D'origine

www.evolutionpowertools.com
Safety Advice:
• Although compact, this Mitre Saw is heavy. To
reduce the risk of back injury, get competent
help whenever you have to lift the saw.
• To reduce the risk of back injury, hold the
tool close to your body when lifting. Bending
your knees so you can lift with your legs, not
your back. Lift by using the handhold areas at
each side of the machines base.
• Never carry the Mitre Saw by the power cord.
Carrying the Mitre Saw by the power cord could
cause damage to the insulation or the wire
connections resulting in electric shock or fire.
• Before moving the Mitre Saw tighten the
mitre and bevel locking screws and the
sliding carriage locking screw to guard
against sudden unexpected movement.
• Lock the Cutting Head in its lowest position.
Ensure that the Cutting Head Locking Pin is
completely engaged in its socket.
WARNING:
Do not use the blade guard as a
'lifting point' . The power cord must be removed
from the power supply before attempting to
move the machine.
• Lock the Cutting Head in the down position
using the Cutting Head Locking Pin.
• Loosen the Mitre Angle Locking Screw. Turn
the table to either of its maximum settings.
• Lock the table in position using the
Locking Screw.
• Use the two carry handle cut-outs machined
into either side of the machine base,
to transport the machine.
Place the saw on a secure stationary work
surface and check the saw over carefully.
Check particularly the operation of all the
machines safety features before attempting
to operate the machine.
(4.1)

GETTING STARTED - UNPACKING

Caution: This packaging contains sharp
objects. Take care when unpacking. This
machine could require two persons to lift,
assemble and move this machine. Remove
the machine, together with the accessories
supplied from the packaging.
Check carefully to ensure that the machine
is in good condition and account for all the
accessories listed in this manual. Also make
sure that all the accessories are complete. If any
parts are found to be missing, the machine and
its accessories should be returned together in
their original packaging to the retailer.
Do not throw the packaging away; keep it safe
throughout the guarantee period. Dispose
of the packaging in an environmentally
responsible manner. Recycle if possible.
Do not let children play with empty plastic
bags due to the risk of suffocation.
ITEMS SUPPLIED
(4.2)
• Instructions
• Hold Down Clamp
• Hex Key 5mm (Blade Change)
• Side Extension Hex Key
• Multipurpose Blade
OPTIONAL ACCESSORIES
(4.3)
(NOT SUPPLIED)
In addition to the standard items supplied
with this machine, other accessories are
available to enhance its performance.
These include the following items:
Additional accessories and information on the
use and type of accessory suitable for your
machine can be obtained by contacting your
local dealer or Evolution Power Tools.
15
EN