Final Safety Check List - Evolution FURY3 STEALTH 030-0006 Instructions D'origine

FINAL SAFETY CHECKS
Slides
Positive Stop
Locking Lever
Mitre Locking Handle
Power Cable
Blade
Safety Guards
Supply
Mounting
Sited
Environment
All the Yes Boxes must be ticked before the machine can be used.
No tick = No use.
Condition
Inserted through the Bevel Neck and connected to the
Cutting Head. Locating lugs successfully deployed
Installed onto Locking Mechanism
Installed onto Locking Screw
Routed correctly and fastened to back slide bracket.
50 – 60mm max deflection at the midpoint
Blade installed with rotation arrows matching.
Outer blade flange and arbor bolt and washer
correctly fitted
Lower Safety Guard fully operational. Cutting Head
locks in the upper position with blade covered.
Cutting Head can only be lowered when Blade
Guard Locking trigger is operated
Supply matches specification found on machine
Rating Plate. Plug matches power source outlet
Either:
a) Machine permanently sited and bolted
to workbench
b) Machine mounted on board which is clamped to
workbench (for portable use)
c) Machine bolted to a dedicated Mitre Saw Stand
Adequate provision made for the handling of long
or irregular shaped workpieces
Dry, clean and tidy. Temperature conducive
to material handling. Lighting adequate
(double banked if fluorescent lights are used).
36
www.evolutionpowertools.com
Yes