Overview Table; Menzer Menzer Menzer Menzer; Transport And Storage; Disposal - Menzer ETS 150 5.0 Traduction De La Notice D'utilisation Originale

MENZER MENZER MENZER MENZER

7.2 Overview table
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
Problem possible causes
MENZER MENZER MENZER MENZER
• The machine is • Mains plug is incorrectly inserted into
without function or the mains socket.
malfunctioning.
MENZER MENZER MENZER MENZER • Mains plug is defective.
• Mains fuse was tripped.
MENZER MENZER MENZER MENZER
• The machine is too • The backing pad or abrasive is not
MENZER MENZER MENZER MENZER
noisy. attached correctly.
• Machine vibration • The material or substrate to be pro-
MENZER MENZER MENZER MENZER
is excessive. cessed is too hard.
• Incorrect backing pad mounted.
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
• The machine • Clogged extraction system.
MENZER MENZER MENZER MENZER
produces too much
dust. • Dust bag in the industrial extractor
is full.
MENZER MENZER MENZER MENZER
• Insufficient extrac-
tion performance. • Kink in the extractor hose.
MENZER MENZER MENZER MENZER
• The extraction openings in the
backing pad and sanding disc are not
congruent.
MENZER MENZER MENZER MENZER
• Too much of • The grit size of the abrasive is too
MENZER MENZER MENZER MENZER the substrate is large.
abraded.
MENZER MENZER MENZER MENZER
• The entire sand- • The abrasive grit is incorrect or too
ing area displays a large and/or the incorrect type of abra-
bad or sub-optimal sive is being used.
MENZER MENZER MENZER MENZER
surface quality.
• The material or substrate to be pro-
cessed is not yet completely dry.
MENZER MENZER MENZER MENZER
• The material or substrate to be pro-
cessed is too soft and/or has a very high
MENZER MENZER MENZER MENZER
filler content.
• Striae in the • Backing pad not flat on the substrate.
MENZER MENZER MENZER MENZER
sanded area.
• The material or substrate to be pro-
cessed is too soft.
MENZER MENZER MENZER MENZER
• Deteriorating • Reverse of the abrasive is worn.
MENZER MENZER MENZER MENZER adhesion of the
abrasive or the • Hook & loop layer on the backing pad
backing pad is worn.
MENZER MENZER MENZER MENZER accessory.
MENZER MENZER MENZER MENZER
12 GB
remediation
• Check the plug connection; insert
the mains plug correctly into the mains
socket.
• Check the mains fuse.
• Contact the MENZER repair service.
• Attach the backing pad and abrasive
securely and centrically.
• Change the rotational speed.
• Choose another abrasive. Read our
abrasive overviews or seek advice.
• Mount the correct backing pad.
• Contact the MENZER repair service.
• Clean the extraction system.
• Empty the dust bag.
• Remove the kink.
• Position the extraction openings
congruently.
• Choose a smaller grit size.
• Choose a smaller grit size and/or a
different type of abrasive. Read our
abrasive overviews or seek advice.
• Read the data sheets and processing
instructions provided by the manufac-
turer of the material to be processed.
• Position the backing pad flat on the
substrate.
• Choose a smaller grit size.
• Replace the abrasive.
• Replace the backing pad.
• Use MENZER pad saver.
MENZER MENZER MENZER MENZER
8. Transport and storage
MENZER MENZER MENZER MENZER
The machine must only be transported in the
MENZER MENZER MENZER MENZER
original MENZER packaging provided.
Always store the sander in its appropriate packag-
ing outside the reach of children and prevent
MENZER MENZER MENZER MENZER
exposure to moisture.
MENZER MENZER MENZER MENZER
9. Disposal
MENZER MENZER MENZER MENZER
Do not dispose of electric power tools in house-
MENZER MENZER MENZER MENZER
hold waste!
The power tools, their accessories and packaging
must be ecologically recycled in compliance with
MENZER MENZER MENZER MENZER
national requirements!
MENZER MENZER MENZER MENZER
EU only:
In accordance with the EU Directive
2012/19/EU on electrical and electronic waste,
MENZER MENZER MENZER MENZER
electric power tools must be collected separately
and ecologically recycled.
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
10. Functional accessories and
peripherals
MENZER MENZER MENZER MENZER
Only use original MENZER accessories matching
this particular power tool for optimal work results.
MENZER MENZER MENZER MENZER
Y. Original MENZER accessories for ETS devices
MENZER MENZER MENZER MENZER
(see page *3*) – not included in the scope of delivery:
MENZER MENZER MENZER MENZER
https://www.menzer-tools.com/
en/ets_150_lp_device
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
Z. MENZER industrial vacuum cleaner
(see page *3*) - not included in the scope of delivery:
MENZER MENZER MENZER MENZER
https://www.menzer-tools.com/
MENZER MENZER MENZER MENZER
en/industrial-vacuum-cleaners
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
MENZER MENZER MENZER MENZER
11. EC declaration of conformity
0511-B01-01-000001-B
We hereby declare under our own responsibility
that the machines listed in the following, marketed
by us and described in this operating manual com-
ply with the following standards. This declaration
loses its validity in case of a change carried out on
one of the machines without our consent.
Product: Random Orbital Sander
Type: MENZER ETS 150 [ 5.0 ]
Serial number range: 181 xxx xxx
Type: MENZER ETS 150 [ 2.5 ]
Serial number range: 182 xxx xxx
Type: MENZER ETS 125 [ 5.0 ]
Serial number range: 183 xxx xxx
Type: MENZER ETS 125 [ 2.5 ]
Serial number range: 184 xxx xxx
Relevant EC directives
2006/42/EC; (EC) Nr. 1907/2006 (REACH);
2011/65/EU; 2014/30/EU
Angewandte harmonisierte Normen
EN 62841-1; EN 62841-2-4; EN 55014-1;
EN 55014-2; EN 61000-3-2; EN 61000-3-3
MENZER GmbH Torsten Ceranski
Celsiusstraße 20 Managing director
04420 Markranstädt Markranstädt,
Germany 16/11/2021
12. Warranty conditions
The consumer is granted a warranty with the
purchase of a MENZER electric power tool from
the BASE LINE product family. The detailed terms
of warranty can be found at:
https://www.menzer-tools.com/
service
MENZER service
Phone: +49 (0) 342 98 74 14 15
Fax: +49 (0) 342 98 74 14 29
Email: service@menzer-tools.com
No liability for typographical errors.
Subject to technical changes.
GB 13