Accessories (For Item No 555 And 557 Only); Measuring System (Only For Item No 558); Quality Control; Saved Programs (Sector L) - Cebora 553 Manuel D'instructions

7.2.5

Accessories (For Item No 555 and 557 only)

COOLING UNIT
7.2.6

Measuring system (only for Item No 558)

7.2.7

Quality Control

7.3

Saved programs (SECTOR L)

Up to 10 ses of welding parameters (process, ignition, mode etc.) can be saved within the JOB sector
78/89
For Item No 557 and 555 only
Press knob B to select the cooling unit operating mode and confi rm.
Return to the previous page, or press and hold knob B (> 0.7 sec.) to
return to the main screen.
The measuring system can be selected for Item No 558
This function enables checking that the arc voltage remains within
preset values.
Select minimum voltage (V MIN) or maximum voltage (V MAX) then
confi rm to set intervention value.
OFF corresponds with disabled function. If, during welding, the
voltage does not correspond to the values set, the wording QUALITY
CONTROL appears. Press knob B to delete the error and return to the
welding screen.
Select and confi rm the JOB sector.
3301230/A