Other Panel Functions; Wiz Function (Sector I); Setting The Welding Process (Section 5.1) - Cebora 553 Manuel D'instructions

Confi rmation enables access to the following welding parameters:
♦ HOT-START CURRENT adjustable from 0 to 100% of the welding current (with saturation at maximum
current). Percentage of current added to the welding current to enable arc ignition. The parameter ac-
tivates in red. Confi rm and adjust the parameter. Confi rmation enables automatic passage to the next
parameter, or turn knob B to select the desired parameter.
♦ HOT-START TIME adjustable from 0 to 500 ms.
♦ ARC FORCE adjustable from 0 al 100%. (with saturation at maximum current). This overcurrent facilitates
transfer of melt metal (only for 555 and 557 items).
7

OTHER PANEL FUNCTIONS

7.1

WIZ function (sector I)

The WIZ (Wizard) function allows quick welding machine setting by following a few steps that are shown automatically
on the display.
7.1.1

Setting the welding process (section 5.1)

3301230/A
Select and confi rm the sector relative to welding parameters.
Select and confi rm the WIZ sector.
The next choice is automatically displayed
Select and confi rm the welding process. The next choice is
automatically displayed.
Note: AC processes available only on Item No 558
73/89