Cebora 553 Manuel D'instructions page 77

H00 IH1
H01 IH2
H02 tH2
Gradient of hotstart fitting with starting welding
H03 SLO
H04 IL1 Amplitude of hot-start current (ignition striking/lift)
H05 tL1 Duration of hot-start current (ignition striking/lift)
H06 LCK Panel setting lock down (free, total, partial)
H08 UDJ
(OFF=not activated, 1=without roll, 2=with roll)
H09 LIM Current level range extension up to 400%
H10 TPH Phase detection (For Item No 555 and 557 only)
3301230/A
Description
Amplitude of hot-start starting current
(ignition with HF)
Amplitude of hot-start second current
(ignition with HF)
Duration of hot-start second current
(ignition with HF)
current
UP/DOWN handling during JOBS
Turn knob B to set the selected parameter; then press to confirm
the setting.
Similarly, you can select, modify and confirm all the welding
parameters that appear in succession, and are summarised in
table 7.
To return to the previous list, select and confirm the sector to
return to the previous screen. To return to the main screen, press
and hold button B (> 0.7 s).
Table 7
PARTIAL FREE
Min Def Max
0 120 300
10 40 100
0 7 250
1 2 100 A/ms
5 25 100
0 150 200
TOTAL
OFF OFF 2
100 100 400
ON ON OFF
UM Sol.
A 1
A 1
ms 1
1
A 1
ms 1
- -
- 1
% -
- -
77/89