Cleaning The Interior; Main Components - Virtus 70/40 FRE8+8 Installation-Emploi-Entretien

reverse order.
- Open the door.
- Remove the control panel.
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
ELECTRIC FRYERS
REPLACING THE HEATING AND LIGHT GLOWS.
- Remove the control panel.
- Remove and replace the component.
REPLACING THE WORKING THERMOSTAT AND
SAFETY THERMOSTAT
Empty the well completely.
Open the door.
Remove the control panel.
Unscrew the locking nut on the heating element
flange.
Remove and replace the component.
Change the sensor/bulb sealing O-Ring in the well.
Reassemble all parts. For assembly, proceed in
reverse order.
19.

CLEANING THE INTERIOR

Check the condition of the inside of the appliance.
Remove any built-up dirt.
Check and clean the fumes exhaust system.
20.

MAIN COMPONENTS

GAS FRYERS EXTREME
- Gas valve
- Main burner
- pilot burner
- Thermocouple
- Igniter
- Piezoelectric ignition
- Safety thermostat
ELECTRIC FRYERS
- Safety thermostat
- Working thermostat
- Heating element
23