Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
In the event of an appliance fault or malfunction, shut
the gas shut-off valve and/or switch the appliance off
at the main switch installed upline.
Installation and conversion to a different type of gas
must be carried out by qualified technicians
authorized by the manufacturer, in compliance with
current safety standards and the instructions in this
manual.
Appliance maintenance and conversion to a different
type of gas must be carried out by qualified
technicians authorized by the manufacturer, in
compliance with current safety standards and the
instructions in this manual.
Clean the appliance following the instructions given in
Chapter " INSTRUCTIONS FOR CLEANING".
1.
DISPOSAL OF PACKING AND OF
THE APPLIANCE
PACKING
The packing is made using environmentally friendly
materials. The plastic recyclable components are:
- the transparent cover, the bags containing the
instructions manual and nozzles (made of
Polyethylene - PE).
- the straps (in Polypropylene - PP).
APPLIANCE
- The appliance is manufactured 90% from recyclable
metals (stainless steel, aluminium sheet, copper.. .. ).
- The appliance must be scrapped in compliance with
current regulations governing such disposal.
- Make the appliance unusable before scrapping.
- It must be disposed of properly.
THE SYMBOL SHOWING A CROSSED-OUT
WASTE CONTAINER ON THE UNIT OR
PACKAGE INDICATES THAT, AT THE END
OF ITS LIFE CYCLE, THE PRODUCT MUST
BE COLLECTED SEPARATE FROM OTHER
WASTE.
SEPARATE COLLECTION OF THIS UNIT AT THE END OF
ITS LIFE CYCLE IS MANAGED BY THE MANUFACTURER.
THE USER WHO INTENDS TO GET RID OF THIS
EQUIPMENT SHALL CONTACT THE PRODUCER AND
FOLLOW THE SYSTEM THAT THE LATTER HAS USED IN
ORDER TO COLLECT THE EQUIPMENT SEPARATELY AT
THE END OF ITS LIFE.
PROPER SEPARATE COLLECTION
POSSIBLE
NEGATIVE
HELPS PREVENT
IMPACTS
ON
THE
ENVIRONMENT AND HEALTH, AND FAVOURS THE
REUSE
AND/OR
MATERIALS.
THE UNAUTHORISED DISPOSAL OF THE PRODUCT BY
THE HOLDER IMPLIES APPLYING ADMINISTRATIVE
PENALTIES PROVIDED BY THE REGULATIONS IN
FORCE.
2.
SAFETY DEVICES
SAFETY THERMOSTAT
THE MANUFACTURER WILL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY
RESULTING
OBSERVING THE FOLLOWING RULES.
- The appliance is equipped with a manual reset safety
thermostat that interrupts heating when the
operating temperature exceeds the maximum
permitted value.
- To restore appliance operation, open the door and
press the thermostat reset button. This procedure
must only be carried out by a qualified, authorized
technician.
INSTRUCTIONS FOR
II.
INSTALLATION
3.
REMINDERS FOR THE INSTALLER
READ THIS MANUAL CAREFULLY. IT
PROVIDES IMPORTANT INFORMATION
FOR SAFE INSTALLATION, USE AND
MAINTENANCE OF THE APPLIANCE.
FAILURE TO COMPLY WITH WHAT IS
PRESENTED BELOW MAY COMPROMISE
THE SAFETY OF THE EQUIPMENT.
THE MANUFACTURER WILL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY
RESULTING
OBSERVING THE FOLLOWING RULES.
Identify the specific appliance model. The model
number is detailed on the packing and on the
appliance dataplate.
The appliance must be installed in a well-ventilated
room.
Installation and conversion to a different type of gas
must be carried out by qualified technicians
authorized by the manufacturer, in compliance with
16
RECYCLING
OF
THE
FROM
FAILURE
FROM
FAILURE
UNIT'S
TO
TO
Publicité
Table des Matières
