Description Of The Keyboard - Mectron MULTIPIEZO PRO Mode D'emploi Et Maintenance

05.2 Û DESCRIPTION OF THE KEYBOARD
handpiece
power light function
6
auto endo
5 5
on perio/scaler
4 4
off restorative
3
2
soft mode
1
0
Touch keyboard
The user can configure the device by simply
touching on the touch keyboard.
Depending on the selected setting, the
electronic feedback system automatically
adjusts the correct operating frequency.
HANDPIECE SELECTION
(ref.
When one of the two handpieces is lifted from
its own support, both touch screen and bottle
will light up on its corresponding side.
A luminous line by the word "handpiece" will
indicate which handpiece is active.
Only one handpiece can be used at a time,
it is therefore necessary to put the unused
handpice back to its place in order to enable
the other one to work.
POWER
multipiezo pro
The power can be adjusted by selecting
the numbers on the touch keyboard in the
"power" column. 7 power levels are foreseen:
clean irrigation
0 = the handpiece has no power: only the
6
auto
irrigation outflows from the handpiece.
5 5
stop
From 1 to 6= the power can be increased in an
4 4
3
incremental way.
2
The power level can be regulated in each
1
function, as indicated here below:
0
ENDO - 7 power levels: from 0 to 6
PERIO/SCALER - 7 power levels: from 0 to 6
RESTORATIVE - 7 power levels: from 0 to 6
N
inside cover)
O
(ref. inside cover)
05 Û USE
EN
13