Mectron MULTIPIEZO PRO Mode D'emploi Et Maintenance page 37

Table des Matières

Les langues disponibles

CLEANING AND DISINFECTION METHOD - Bottles

08 Û CLEANING AND STERILIZATION

Carefully rinse under running water the

internal and the external surfaces of the

bottles and of the caps;

Clean the external surfaces of the bottles

and of the caps with a clean, soft cloth

with low ﬁber-release, dampened with

a detergent solution (pH 6-9) and, if

need be, disinfect with a non-aggressive

disinfectant solution with neutral pH (pH7),

following the instructions provided by the

manufacturer of the solution;

Remove any detergent remains with a soft

cloth with low ﬁber-release dampened

with sterile water in order to maintain the

disinfection;

Once you've ﬁnished the cleaning

operations, check the bottles and caps

under an adequate source of light, paying

attention to the details that could conceal

dirt residues (cavities, grooves) and, if need

be, repeat the cleaning cycle.

Table des Matières

Chapitres

Table des Matières

Multipiezo