Identification Data; Û Identification Data; Identification Plate Of The Device; Identification Data Of The Handpiece - Mectron MULTIPIEZO PRO Mode D'emploi Et Maintenance

MULTIPIEZO PRO
02 Û IDENTIFICATION DATA
An exact description of the model and of the serial number of the device will enable our After-
Sales Service to provide fast and efficient support.
Always refer these data whenever you contact an Authorized Mectron Service Center.
EN
02.1 Û IDENTIFICATION PLATE OF THE DEVICE
Every device has an identification plate that
bears the technical characteristics and the
serial number. The identification plate is
located on the inferior panel of the device.
Additional specifications are reported in this
manual (See Chapter 11 - TECHNICAL DATA).
02.2 Û IDENTIFICATION DATA OF THE HANDPIECE
Each handpiece is laser-marked with Mectron
logo (ref. 1) and with its serial number (ref. 2).
02.3 Û IDENTIFICATION DATA OF THE INSERTS
The following data are laser-marked on each
insert: the name of the insert (ref. 3), the
Mectron logo (ref. 4) and the lot number to
which the insert belongs (ref. 5).
8
MULTIPIEZO PRO
~
100-240 V 90 VA - 50/60 Hz.
Intermittent operation
0476
105000000
3 4
Manufacturer
Mectron S.p.A.
Via Loreto 15/A
16042 Carasco -GE- Italy
made in Italy
1 2
5