Mectron MULTIPIEZO PRO Mode D'emploi Et Maintenance page 32

MULTIPIEZO PRO
Remove the insert from the ultrasonic tank
and rinse with distilled water;
EN
Delicately brush the surface of the insert
again with the brush with soft nylon
bristles;
Rinse the internal canal of the insert
with distilled water injected under pressure
(3,8 bar) for at least 10 seconds to eliminate
all residues;
Once you've finished the cleaning
operations, check all the inserts under an
adequate source of light, paying attention
to the details that could conceal dirt
residues (threading, cavities, grooves)
and, if need be, repeat the cleaning cycle;
30
3
4
5
3,8 bar
10 sec
6