Setting the answering mode
1. Press the "Menu" button and select the
"ANS. Machine" entry with
2. Now press "Select".
3. Search for "TAM Setting" and confirm with
"Select".
4. Select "Answer Mode" and confirm with
"Select".
5. With
you can select between
"ANS&REC" and "Answer Only" and con-
firm with "Select".
Setting the number of rings for the TAM
You can set the number of rings before the
TAM activates.
1. Press the "Menu" button and select the
"ANS. Machine" entry with
2. Now press "Select".
3. Search for "TAM Setting" and confirm with
"Select".
4. Select "Set Ring" and confirm with "Se-
lect".
5. With
you can select between 2 and 6
rings and confirm with "Select".
Save tolls with remote query with the
TAM
In Toll Saver mode incoming calls are answe-
red after 5 rings, until the first new message
is recorded. Afterwards the answering ma-
chine answers after 3 rings. This is useful if
you try to start a remote query. If the answe-
ring machine does not answer after the 4th
ring, no message is recorded and you can
hang up before having to pay for the call.
If the answering machine answers after 3
times, a new message is recorded.
1. Press the "Menu" button and select the
"ANS. Machine" entry with
2. Now press "Select".
3. Search for "TAM Setting" and confirm with
"Select".
4. Select "Set Ring" and confirm with "Se-
lect".
5. With
.
Setting the remote query PIN number.
A secret 4-digit PIN number is required to
listen to your messages from an external
telephone. The standard PIN number is
"0000". For security reasons it is recommen-
ded to change this PIN number.
1. Press the "Menu" button and select the
2. Now press "Select".
3. Search for "TAM Setting" and confirm with
4. Select "Change PIN" and confirm with
5. Enter the old PIN and press "OK".
.
6. If you have entered the correct PIN, you
7. Enter the new PIN to reconfirm and end
Limiting recording time
To save memory space you can limit the re-
cording time of the caller.
1. Press the "Menu" button and select the
2. Now press "Select".
3. Search for "TAM Setting" and confirm with
4. Select "Record Time" and confirm with
5. With
.
select "Toll Saver" and confirm
with "Select"
"ANS. Machine" entry with
"Select".
"Select".
are requested to enter the new 4-digit PIN
and then press "OK".
the process with "OK".
"ANS. Machine" entry with
"Select".
"Select".
you can select between 120s,
120s, 180s or "Unlimited" and confirm
with "Select".
.
.
English 47