Setting The Ringtone Melody; Setting The Ringtone Volume; Turning On / Off Key Tone; Keypad Lock Hs - HumanTechnik freeTELeco Mode D'emploi

Setting the ringtone melody

There is a choice of 10 ringtones. You can
select different tones for when the call arri-
ves intercom (from other handsets registe-
red on the same base) or externally (from
the landline).
1. Press the "Menu" key and select the
entry "HS Settings" with
2. Now press "Select".
3. Select "Ring Setup" and confirm with
"Select".
4. You can now select the following options:
- INT Ring
- EXT Ring
5. Now select the preferred option with
"Select".
6. Select "Melody" and confirm with "Se-
lect".

Setting the ringtone volume

1. Press the "Menu" key and select the
entry "HS Settings" with
2. Now press "Select".
3. Select "Ring Setup" and confirm with
"Select".
4. Select "Volume" and confirm with "Se-
lect".
5. Select the preferred volume and comple-
te the setting with "Select".

Turning on / off key tone

1. Press the "Menu" key and select the
entry "HS Settings" with
2. Now press "Select".
3. Select "Tone Setup" and confirm with
"Select".
4. Select "Key Tone" and confirm with "Se-
lect".
5. Select "Off" and complete the setting with
"Select".
42 English
.
.
.

Keypad lock HS

When this function is enabled, all keys
except
are locked and non-functio-
nal. You can accept incoming calls with
. When you end the call with
telephone returns to locked mode.
Turning on the lock: Press the
"HS Locked" appears on the display. A key
symbol appears on the display.
To disable the lock again, press
the key symbol on the display disappears
again.

Range alarm

A signal tone will always be heard when
the handset is outside the range of the
base station. This signal tone can be turned
on / off.
1. Press the "Menu" key and select the
entry "HS Settings" with
2. Now press "Select".
3. Select "Tone Setup" and confirm with
"Select".
4. Select "Range Alarm" and confirm with
"Select".
5. Select "On" or "Off" and complete the
setting with "Select".

Language

The handset has a choice of 6 languages.
1. Press the "Menu" key and select the
entry "HS Settings" with
2. Now press "Select".
3. Select "Language" and confirm with
"Select".
4. Select the preferred language with
and complete the setting with "Select".
, the
key until
until
.
.