Turning On / Off Handset; Making Calls With The Handset; Making A Telephone Call; Answering A Call - HumanTechnik freeTELeco Mode D'emploi

Turning on / off handset

If the handset is switched off, it is automati-
cally switched on by placing it in the charger.
Otherwise, proceed as follows:
If the handset is switched on, press the
key until the device switches on. The hand-
set now searches for the the base and is
ready.
To switch the handset off again, press the
key until the device switches off.

Making calls with the handset

(HS)

Making a telephone call

1. Press the
2. Enter the telephone number.
3. To end the telephone call, press the
key.

Answering a call

1. The telephone rings.
2. Press the
3. To end the telephone call, press the
key.

Telephoning with a connected headset

- Making a telephone call
1. Press the
2. Enter the telephone number.
3. To end the telephone call, press the
key.
- Answering a call
1. The telephone rings.
2. Press the
the connected headset.
3. To end the telephone call, press the
key.
36 English
key.
key.
key.
key to hold the call over

Using the device speaker during a call

1. To turn on the device speaker, press
the key. The receiver's speaker
remains switched on.
2. You can now continue the telephone call
over the device speaker and the built-in
microphone.
3. To turn on the device speaker again,
press the key.
Adjusting the volume of the device spea-
ker
In handsfree mode, you can adjust the vo-
lume of the device speakers using the keys
or , which are on the left side of
the telephone.
Redialling the last dialled telephone
number
1. The last dialled telephone number is
displayed by pressing
2. With you can select the last dialled
numbers.
3. Press the
Adding the last dialled numbers to the
phonebook
1. The last dialled telephone number is
displayed by pressing
2. With you can select the last dialled
numbers.
3. Press "More" and select "Add to PB"
using the key "Select".
4. Now enter the name and select "Save".
5. You can now edit the number again, if
necessary, and then select "Save".
6. Select the preferred melody for this con-
tact and select "Save", to complete the
procedure.
.
key to select the number.
.