Setting The Basis Dial Mode; Setting The Flash Time; Telephone Settings (Hs); Setting The Alarm - HumanTechnik freeTELeco Mode D'emploi

Masquer les pouces Voir aussi pour freeTELeco:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54

Setting the basis dial mode

1. Press the "Menu" key and select the
entry "BS Settings" with
2. Now press "Select".
3. With the
key, scroll to "Dial Mode" and
press "Select".
4. Now select the preferred dial mode and
complete the setting with "Select".

Setting the flash time

1. Press the "Menu" key and select the
entry "BS Settings" with
2. Now press "Select".
3. Select "Flash Time" and confirm with
"Select".
4. With
, you can select between Flash-1
(100ms), Flash-2 (300ms) and Flash-3
(600ms), and confirm with "Select".

Telephone settings (HS)

Setting the alarm

With the handset, you can set an alarm with
a snooze function.
1. Press the "Menu" key and select the
entry "HS Settings" with
2. Now press "Select".
3. Select "Alarm" and confirm with "Select".
4. Select "On" and confirm with "Select".
5. Enter the preferred alarm time and con-
firm with "Select".
6. Turn the snooze function on or off, and
complete the procedure with "Wählen".
An alarm clock symbol is shown in the
display when the alarm is enabled.
7. When the alarm sounds, you can turn it
off by pressing any key. If you have ena-
bled "snooze", the alarm will sound again
after 10 minutes until you turn the alarm
off again.
.
.
.

Turning off the alarm

1. Press the "Menu" key and select the
entry "HS Settings" with
2. Now press "Select".
3. Select "Alarm" and confirm with "Select".
4. Select "Off" and confirm with "Select".
.
English 41

Publicité

Table des Matières
loading

Table des Matières