Saving Telephone Numbers From The Caller Id List In The Phonebook; Delete A Call From The Caller Id List; Delete All Calls From The Caller Id List; Base Settings With The Handset (Hs) - HumanTechnik freeTELeco Mode D'emploi

Saving telephone numbers from the cal-
ler ID list in the phonebook
To save the numbers, proceed as follows:
1. Press the "Menu" key and select the
entry "CID Book" with
2. With the key, you can now scroll
through the list of callers.
3. Press "More" and select "Add to PB".
4. Then enter the name and confirm again
with "Save".
5. You can now edit the number, if necessa-
ry, and then select "Save".
6. Now select the preferred ringtone for this
telephone number and press "Select".
This saves the number.

Delete a call from the caller ID list

1. Press the "Menu" key and select the
entry "CID Book" with
2. With the key, you can now scroll
through the list of callers to the required
entry.
3. Press "More" and select "Delete" with
"Select". This deletes this number.

Delete all calls from the caller ID list

1. Press the "Menu" key and select the
entry "CID Book" with
2. With the key, you can now scroll
through the list of callers to the required
entry.
3. Press "More" and select "Delete All" with
"Select". This deletes all entries.
40 English
.
.
.
Base settings with the hand-
set (HS)
Different settings can be made on the base
station with the handset.

Modifying the PIN code

For security reasons, the PIN code is some-
times requested with some functions before
the command is run.
To modify the PIN code, proceed as follows:
1. Press the "Menu" key and select the
entry "BS Settings" with
2. Now press "Select".
key, scroll to "Modify PIN".
3. With the
4. Now press "Select".
5. Enter the previous PIN code and press
"Select".
6. If you have entered the correct PIN code,
you will be asked to enter the new four-
digit PIN code, and then press "Select".
7. Enter the new PIN code again to confirm
it, and complete the procedure with "Se-
lect".
Unsubscribing handsets (HS) from the
base
You can unsubscribe a handset from a base
registration.
1. Press the "Menu" key and select the
entry "BS Settings" with
2. Now press "Select".
3. With the key, scroll to "Terminate HS"
and press "Select".
4. Enter the PIN code and press "Select".
5. Select the handset which is to be deleted
from the base and confirm with "Select".
Caution: The HS from which the unsub-
scription is made cannot be deleted.
.
.