Delete The Last Dialled Telephone Number; Adjusting The Receiver Volume / High / Low Setting; Using The Telephone With A Hearing Aid; Mute - HumanTechnik freeTELeco Mode D'emploi

Delete the last dialled telephone number

1. The last dialled telephone number is
displayed by pressing
2. With you can select the last dialled
numbers.
3. Press "More" and select "Delete" to de-
lete this entry or "Delete All" to delete all
entries.
4. The telephone asks for confirmation.
Press "Select" to end the procedure.
Adjusting the receiver volume / high / low
setting
The receiver volume can be adjusted du-
ring a telephone call using the keys
, which are on the left of the telephone.
Additional amplification can be turned on
key. When additional amplifi-
with the
cation is enabled, a receiver volume of up to
30 dB is reached. When the amplification is
enabled, the red amplifier display at the top
of the telephone lights up. Additional amp-
lification is turned off by pressing the
key again.
You can adjust the tone with
Press the key and set the preferred
tone from 1 to 3.
Note:
The tone control can only be adjusted during
a call.

Using the telephone with a hearing aid

You can use your telephone with hearing
aids that are fitted with a telephone coil (T-
coil). To do this, set the selector switch on
your hearing aid to the "S" or "HS" position.
Please ensure that the telephone receiver is
held as closely as possible to your hearing
aid.

Mute

You can temporarily turn off the microphone
. on your telephone during a call so that your
conversation partner cannot hear you.
During the call, "Call Muted" appears on the
lower-right edge of the display screen. The
mute function is enabled by pressing the
right control key. Pressing it again disables
the function.

Flash key

This function is needed to enable certain T-
Net features.
During the call, "Flash" appears on the
or lower-right edge of the display screen. By
pressing the left control key, the telephone
line is interrupted for a defined period of time
(100ms / 300ms / 600ms) ("Setting the flash
time").

Searching for the handset

If you have misplaced the handset, you can
search for it using the handset search key
. 1 Briefly press the search key
2. Press the search key
underneath the base.
The registered handset starts ringing for
about 60 seconds.
the search procedure.
again to end
English 37