General Information; Warranty Notes; Notes On These Operating Instructions - Parker TGE308 Notice D'utilisation

EN | Operating Instructions

1. General information

Warranty notes

In the following cases, the warranty shall be void:
◊ If corrosion and malfunctions occur due to aggressive substances in the gas and
in the environment.
◊ If the fi lter is not used in accordance with its intended use.
◊ If the fi lter is not serviced as specifi ed in these operating instructions.
◊ If spare parts not matching the quality of genuine parts are used.
◊ If the fi lter is operated with other media than those indicated on the type label.
◊ If modifi cations not approved by the manufacturer are made to the fi lter.
◊ When an ATEX-compliant fi lter was not properly integrated in the local equipo-
tential bonding system.

Notes on these operating instructions

The present operating instructions contain important information on the safe and
economic operation of fi lter series TGE3 for technical gases.
Layout conventions
▶ Work steps that you have to carry out one after the other are numbered.
◊ Lists are marked by a small box.
This symbol accompanies information relevant to explosion protection
as per ATEX (94/9/EEC).
Warning!
These safety notes warn against damage to machines or equipment
and help you to avoid such damage.
Danger!
These danger notes with a grey background warn against personal in-
jury and/or danger to life and limb; danger notes help you to avoid dan-
gerous or life-threatening situations for yourself and/or third parties.
Target group of these operating instructions
The present operating instructions address all persons who work with and on the
fi lter. We assume that these persons are specialized staff, e.g. fi tters or electricians
or appropriately instructed staff.
We assume the following:
◊ There are appropriate operating instructions for the application intended by the
operator.
◊ The staff has been instructed how to handle the used gas and is aware of the
involved risks and the general danger prevention measures.
◊ The staff have basic experience in handling pneumatic devices.
2
General information
TGE 308-318