Mode "Data" (Request Of Saved Data); Select Function; Details On The Saved Values - Conrad Kit W-210 Notice D'emploi

13. Mode "DATA" (request of saved data)

a) Select function
• If the pulse watch is not in mode "DATA", push the button (B)
"MODE" briefly repeatedly until the display shows "DATA".
• After approx. 2 seconds, the mode "DATA" is displayed.
b) Details on the saved values
• The first display after you switched to mode "DATA" is the total
time of your last training unit.
In our example, this would be 2 hours, 30 minutes and 56 sec-
onds.
• To switch to the next value of the saved training data, push the button (D) "RESET". Each time
the button is pushed, the menu switches one item forward.
64