Introduction; Explanation Of The Rating Plate Affixed To The Machine; Explanation Of The Pictograms; Explanation Of The Symbols - Sabo 45-220 Livret D'entretien

1 INTRODUCTION

Dear Garden Lover,
Where pride in a trim lawn is coupled with a love of gardening, gardeners really
appreciate good gardening equipment. You have made an excellent choice in
purchasing your new scarifier. It combines the power of a major traditional brand with
the innovations of modern high-tech. You will feel this when you are working with it and
be very pleased with the wonderful result.
Yet before you start work on your lawn, here is some important information that you
should always observe.
Before you start your scarifier for the first time, read this operation manual through
carefully to familiarise yourself with the correct operation and maintenance of the
machine and to avoid injury or damage to your scarifier.
Use the scarifier carefully. The pictograms on the equipment draw your attention to the
most important precautionary measures.
The safety instructions in this operating manual are marked with symbols.
The meaning of the pictograms and symbols is explained in the following chapters.
The terms "left" and "right" always refer to the left and right-hand side of the equipment
seen in the direction of movement.
Your scarifier will work reliably when the technical instructions are followed exactly. We
would like to point out that any damage to the scarifier caused by operator faults is not
covered by warranty / guarantee obligations.
We hope you enjoy cultivating your lawn.
2 EXPLANATION OF THE RATING PLATE AFFIXED TO THE
MACHINE
1 Model
2 Production identification number
3 Rated input
4 Weight
5 Tested safety (depending on model)
6 Rated engine speed
7 Model year
8 CE conformity mark
9 Scarifier
10 Guaranteed sound power level
11 Serial number
These operating instructions apply for the following models:
45-220 (SA331520): Operating width 450 mm, engine B&S, 950 Series

3 EXPLANATION OF THE PICTOGRAMS

Read and follow the operator's manual and safety instructions!
Risk caused by thrown elements when the motor is running –
Observe the safety distance / Keep all persons outside the
danger area!
Beware of sharp working tools. – Do not cut your fingers and
toes. Please make sure that hands and feet do not get under
the housing. – Stop the engine and remove the spark plug
connector before carrying out cleaning and maintenance work.
Engine STOP
Danger of objects being flung out when the engine is running –
wear protective goggles.
Loud noises can lead to hearing impairments –
wear ear protection!
Beware of hot surfaces - do not touch the engine and exhaust.
Risk of burns!
Exhaust fumes are toxic - do not have the engine running in
closed rooms. Risk of poisoning!
Petrol is highly inflammable - keep away from sparks and open
flame, do not smoke. Fire hazard!

4 EXPLANATION OF THE SYMBOLS

WARNING
Always read and follow the operating instructions and general safety
regulations carefully. Keep the operating instructions for reference
purposes.
Proper use also includes adherence to the operation, maintenance
and service conditions prescribed by the manufacturer.
WARNING
Keep all persons outside the danger area!
Contact with the rotating cutters can cause severe injury.
Objects ejected at high speed can cause severe injury.
You must never scarify the lawn if there are other persons nearby,
especially children or animals.
WARNING
Petrol is highly inflammable and explosive.
Petrol or oil leaking out onto the hot engine are highly inflammable.
Fire and explosions can cause severe injury and material damage.
Whilst the engine is running or if the machine is hot, the lid of the
petrol tank must not be opened, nor may the tank be filled with more
petrol.
When the engine is running, the dipstick must always be screwed in
firmly.
WARNING
Petrol is highly inflammable and explosive.
Fire and explosions can cause severe injury and material damage.
No smoking and no naked flames while filling the tank.
WARNING
Watch out for sharp blades! Contact with the rotating cutters can
cause severe foot injuries.
Only start the motor when standing behind the machine.
Ensure that your feet do not get under the housing.
WARNING
Watch out for sharp blades! Contact with the rotating cutters can
cause severe hand and foot injuries.
When the motor/blade shaft is running, always observe the safety
distance to the machine which is maintained by the handlebar.
Ensure that your hands and feet do not get under the housing.
2