NSK Surgic XT Plus Mode D'emploi page 9

CAUTION
Make sure that the tube is securely set on the rollers when closing the Pump Cover. If the tube is not correctly
positioned on the Rollers and the cover is closed, the tube could be cut or sheared. (Fig. 7)
After the tubes are correctly positioned, close the Pump Cover
by turning the Pump Cover Lever to the 'CLOSE' position (180
degrees counterclockwise) (Fig. 8 & 9)
5-5 Mounting the Coolant Solution Hanger Post
Mount the Coolant Solution Hanger Post onto the Holder on
the Control Unit, the post will only fit into one position (Fig10).
Place the bottle as shown in Fig. 11.
Rollers
Fig. 11
8
Fig. 7
Pump Cover Lever Pump Cover Lever Pump Cover Lever
Align
Fig. 10
Fig. 8
Fig. 9