NSK Surgic XT Plus Mode D'emploi page 6

LCD display on the Control Unit Console
Coolant Flow Level
(1) Coolant Flow Level
Displays the selected coolant solution flow level; the selected Flow level is indicated by 1 to 5 levels of illuminated
indicators. No illumination indicates when the Coolant Solution Flow is off.
(2) Program Number
Displays the selected program number.
(3) Gear Ratio
Displays the selected gear ratio of the handpiece.
(4) Forward/Reverse Indicator
Displays the selected direction of the Micromotor.
(5) Speed
Displays the selected speed.
Depressing Foot Control:Rotation speed of the motor displayed on the LCD (Assuming the correct gear ratio is
selected)
Without pressing Foot Control : Max Rotation preset setting displayed on the LCD
(6) Torque: Displays the selected torque.
* When using the 1:1 direct drive or Speed increasing handpiece, the torque is not displayed. (This function is
appropriate for 2:1 increase speed handpiece or more)
(7) Torque Bar Graph
Display the actual operating torque range. When all bars illuminate, the operating torque is at maximum. When bars
are half illuminated then the operating torque is approximately 50% of the preset torque.
CAUTION
The LCD display panel is produced from liquid crystal and should always be treated with care.
Program Number Forward / Reverse
Gear Ratio
Speed
Torque Bar Graph
5
Torque