NSK Surgic XT Plus Mode D'emploi page 18

10. Specifications
10-1 Control Unit
Model
Type
Power Supply Voltage
Frequency
Power Consumption
Max. Pump Output
Dimensions
10-2 Micromotor
Model
Type
Speed Range
Input Voltage
Dimensions
10-3 Foot Control
Type
Code length
10-4 Handpiece
Model
Max. Rotation Speed
Chuck Type
Gear Ratio
Spray Type
Bur/Drill Type
Bur/Drill Length
Max. bur length
Max diameter
Optic
Do not exceed the rotation speed that bur manufacture recommends. Adjust the rotation speed which bur manufacture recommend,
if you use the allowable rotation speed is less than 120,000min
* If you use internal irrigation system drills.
11. Disposing Product
Consult with dealer from whom you purchased it about waste disposal.
Surgic XT Plus
NE179
AC120 / 230V
50/60Hz
52VA
75mL / min. (.02 gal/min)
W268 x D230 x H103mm
SGL50M (with Optic)
E295-050
200 - 40,000min
ø24 x L105mm (Without the Motor Cord)
FC-51
2M
X-SG20L
40,000min
Push Bottom Chuck
20:1 Reduction
External, Internal*
Ø2.35Surgical bur-drill (ISO3964)
11.6mm
Ø4.7mm
Glass Rod Optic
SG 50MS (without Optic)
E290-050
-1 (rpm)
DC30V
SG20
-1
36mm
–
-1 .
17