Checchi & Magli TRIUM Manuel D'utilisation Et D'entretien page 76

Replacing the ploughshare
D
E
B
A
UN41-0159NI
Proceed as outlined below.
1) Remove the circlip (A).
2) Unscrew the wing nut (B).
3) Lift and hold the clamping device (D).
4) Push the ploughshare forwards and turn it so it is fac-
ing downwards.
5) Hold the ploughshare and remove the screw (C) and
washer (E).
For the assembly, carry out the same operations as for
disassembly but proceeding in reverse order.
Replacing the flexible plate
UN41-0344NI
English language
INFORMATION CONCERNING REPLACEMENTS
NOTICE
During assembly, fit the plant control plate inside the
ploughshare.
Make sure the flexible plate is centred with respect
to the ploughshare (see "Adjusting the flexible plate
centring").
Make sure that the flexible plate protrudes from the
ploughshare (see "Adjusting the flexible plate posi-
tion").
34
8
E
Use and maintenance