Checchi & Magli TRIUM Manuel D'utilisation Et D'entretien page 70

Night-time work or poor visibility conditions
Working at night or in poor visibility conditions increases
the risks arising from machine use; in these conditions,
Transit on public roads
WARNING
It is prohibited to carry people and/or things on the
work vehicle.
Before any on-the-road driving remove all the trays
from the tray holder and clean the working and
pneumatic parts to remove any soil residues.
A
UN41-0153MF
Prolonged disuse of the work vehicle
If the work vehicle is not due to be used for long periods,
proceed as follows.
1) Clean the machine thoroughly, taking care to remove
any chemical or fertiliser residues (see "Cleaning the
work vehicle").
2) Check the condition of the all the machine's parts
and replace any that are worn or damaged.
3) Always check that the bolts / screws are correctly
tightened.
4) Apply grease to all the unpainted parts.
5) Grease the parts that require lubrication (see "Lubri-
cation points diagram").
6) Park the machine carefully on flat ground in a dry
area protected from the weather.
English language
INFORMATION FOR USE
proper lighting must be provided to ensure safe work.
When transporting the work vehicle / tractor assembly,
the regulations of the highway code must always be
complied with.
The three-point hitch must be secured with the relative
bars (A) to prevent the work vehicle swinging and the
speed of travel must be adjusted to prevent loss of con-
trol of the vehicle.
Leave enough room around the work vehicle for the
hitching up and unhitching manoeuvres.
Lower the foot to the ground (if featured) to guarantee
work vehicle stability.
28
6
Use and maintenance