Checchi & Magli TRIUM Manuel D'utilisation Et D'entretien page 47

Permitted gradients
The ground conditions (slippery, sloping, etc.) and the
type of tractor used can reduced the stability of the
tractor/work vehicle assembly and cause sudden, dan-
gerous movements, especially when the work vehicle is
lifted off the ground.
Declaration of conformity
CHECCHI & MAGLI s.r.l.
Via Guizzardi n° 38
40054 – BUDRIO (BOLOGNA) - ITALIA
hereby declares, under its own responsibility that the
planting machine in question, i.e. models:
TRIUM/1, TRIUM/2, TRIUM/3, TRIUM/4, TRIUM/5, TRIUM/6
comply with the Essential and Health Safety Require-
ments provided for by Directive 2006/42/CE.
Guards
WARNING
Never use the machine without the safety guards.
The work vehicle is fitted with guards covering the trans-
mission components to prevent accidental contact with
the moving parts.
The illustration shows the protective casings (A - B - C - D
- E - F) fitted.
UN41-00612IN
English language
TECHNICAL INFORMATION
F
A
C
It is up to the tractor driver to assess the environmen-
tal conditions of the work area and not to exceed the
permitted gradients established for the tractor with the
equipment mounted on it (see tractor user manual).
The following regulations in particular have been ap-
plied: UNI EN ISO 12100-1, UNI EN ISO 12100-2 and UNI
EN 13857, on machine safety.
Budrio
CHECCHI & MAGLI s.r.l
Legal representative
Nerio Checchi
The casings (B - C - D - E) are fitted on each planting
unit.
The casing (F) is fitted on each driving wheel with the Rap-
id Shift gearbox.
5
2
D
B
A
E
Use and maintenance