Adjustment Weight Balance - probst HVZ-ECO Instructions D'emploi

Adjustments
6.7

Adjustment weight balance

When the adjusting of the main- and side clamping is finished, mind, that the device (HVZ-ECO) hangs
horizontal to the working area. If required a little tilled to the machine side (rollers).
Remove the linchpin (C) at the chain suspension (A),
then adjust both adjusting chains (B) to the same length
(see Fig. 30).
Secure the adjusting chains (B) again with linchpin (C)
 see ´Fig. 32
Additional the position of the chain suspension (A) can
be changed by using a other hole (see  in Fig. 31)
(A)
Danger of injuring the hands!
51400034
(A)
(B)
(B)
Fig. 31
(A)
V3
29 / 41
Fig. 30
(C)
Fig. 32
GB