Package Contents
Each access point package contains these items:
•
Access point unit (integrated antenna or external antenna configuration)
Power injector (LR2) unit
•
Power module and AC power cord
•
•
Quick Start Guide: Cisco Aironet Lightweight Access Points
Product mounting instructions (this document)
•
•
Translated safety warnings document
Read Me document
•
Cisco product registration and documentation feedback cards
•
The optional roof mount kit contains these items:
One roof-wall mount
•
Two dual-coax cables [20 ft (6.1 m) and 50 ft (15.2 m)]
•
Multi-function mount (consisting of a access point bracket and a mast bracket)
•
Two tower clamps (U-bolts) with four nuts and washers
•
•
Four bolts and washers for securing the access point bracket to the mast bracket
Four bolts for securing the access point bracket to the unit
•
Grounding block and mounting screws
•
•
Ground lug for the access point, two hex nuts, and two washers
Weatherproofing kit (consisting of Coax Seal and electrical joint compound)
•
The optional wall mount kit (for indoor use) contains these items:
Wall mount bracket with 4 mounting bolts and washers
•
Two sub-mini RG-59 coax cables (12 in. or 30.5 cm)
•
Safety Warnings
Translated versions of all the safety warnings are provided in the access point box and in Appendix A,
"Translated Safety Warnings" section of the Cisco Aironet 1300 Series Outdoor Access Point/Bridge
Hardware Installation Guide.
All Installations
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury. Before
you work on any equipment, be aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents. (To see translations of the warnings
that appear in this publication, refer to the appendix "Translated Safety Warnings.") Statement 84
78-17634-01B0
Cisco Aironet 1300 Series Lightweight Outdoor Access Point Mounting Instructions
Package Contents
5