Mounting the Access Point
Attaching the Housing Bracket to the Access Point
To attach the housing bracket to the access point, follow these steps:
Step 1
Before attempting to attach the housing bracket, refer to
Figure 10
3
1
Housing bracket
2
Hex bolt with serrated flange
Attach the housing bracket to the housing using four hex bolts. Torque bolts to 8 to 10 ft-lb.
Step 2
Step 3
Apply a thin layer of electrical joint compound to the access point at the ground lug location (See
Figure
Cisco Aironet 1300 Series Lightweight Outdoor Access Point Mounting Instructions
30
Housing Bracket Attachment
2
2
1
2
2
11).
Figure
10.
3
3
Hang pin
78-17634-01B0