Alpine AutoSet Plus Manuel page 42

Figure 100
Below are some of the useful tools that can be accessed
from the left tabs panel:
1. HW/SW versions (under System Overview tab)
(Figure 101) :
Provides quick information about each of the
AutoSet Plus motion control components
(Drives, controller), such as:
• Device types
• Serial numbers
• Firmware revisions
• Hardware version
• Controller Type
Figure 101
2. Secros Topology:
The Sercos Topology provides a graphically
based diagnostic. It shows the hardware
connections and it identifies any broken
connection. Figure 102 shows the connection
from the master controller to the system's
drives, as well as the connection between the
drives and the motors.
The number of the drives on the diagnostic software matches the
number of the axes on the AutoSet Plus software.
Also, the Sercos Topology highlights any issue
area on the system.
For example, on Figure 103 the system located
error 8979 on drive number 6. By clicking on
the error code, the user can go directly to the
System Diagnostic Screen (Figure 97) without
the need to enter the error code manually to
diagnose the problem.
42
EN
AutoSet Plus
P R O D U C T M A N UA L
NOTE
Figure 102
Figure 103