Job Select Screen; Without Eshop Running - Alpine AutoSet Plus Manuel

Title Picture Description
Move Truss
Click to Opens Move Truss Screen (Section 3.4.1)
Pan Window
Click to pan the window to the left.
Left
Pan Window
Click to pan the window to the right.
Right
Pan Window
Click to pan the window up.
Up
Pan Window
Click to pan the window down.
Down
Toggle Table Click to Toggle the Table view On/Off.
Toggle Plates
Click to Toggle the Plate view On/Off.
Toggle Dims
Click to Toggle the Dimension view On/Off.
Toggle Web
Click to Toggle the Web information On/Off.
Information
Click to pause job – This pause time for break.
Pause
Available only if running Eshop.
Click to send a request for a piece to be recut.
Recut
Available only if running Eshop.
Click to get information on about piece –
Piece Info
ie; Angles, length, Grade etc.
Available only if running Eshop.
Click to print a picture of the current truss and
Print Truss
table information. Available only if running
Eshop.
Click to access employee Login.
Login
Available only if running Eshop.
Get a
Click to get plate list.
Plate List Available only if running Eshop.
Record Setup Click to record setup time.
Time
Available only if running Eshop
3.4.

Job Select Screen

3.4.1. Without eShop Running

Click Open Job from the Main screen and to open the
Job Select screen (Figure 27).
1
The Job Select screen includes the following items
which are identified by number on Figure 27:
1. Select job list – Select a job from the list
2. Select Job Icon – Click on select icon to load the
selected job
3. Exit Icon – Click on exit icon to return to the Main
Screen
4. Search Icon – Click on to search for a job by name
• A popup window will appear to enter job name to
search (Figure 28)
Job name is not case sensitive but it requires the operator
to enter complete job name.
18
EN
AutoSet Plus
P R O D U C T M A N UA L
Figure 27
NOTE
Figure 28