Autoset Plus Software; Computer; Alpine Industrial Computer; Software Language - Alpine AutoSet Plus Manuel

3. AutoSet Plus Software

WARNING
!
Make sure the tabletop is clear of all persons, lumber,
jig stops and obstructions before moving the pucks.
3.1.

Computer

The AutoSet Plus system is equipped with an industrial
computer running Windows Embedded Standard. It
utilizes an externally accessible CFast SSD card for the
primary hard drive. The CFast card gives the advantage
of a quick start up time as well as inexpensive and easily
replaceable backup copies.

3.1.1. Alpine Industrial Computer

Connections on the top of the computer:
Connections on the bottom of the computer:
Addition of a second monitor to display HMI visuals at a
second location:
1- Purchase a USB 3.0 to HDMI graphics adapter.
2- Run an HDMI cable from the monitor to inside
the HMI cabinet.
3- Attach the adapter between the HDMI cable
and any available USB port.
4- Load the driver for the adapter.
5- Microsoft operating system: In the Control
Panel, select the Display program, then
Change display settings, then Detect the
second monitor and select duplicate (Multiple
displays:) to have the same visuals on both
monitors. Please contact Alpine Technical
Support if you have any questions or issues.
3.2.

Software Language

AutoSet Plus software is available in three languages
English, Spanish and French. Changing from one
language to the another can be done from ini setting
file located under C:\AUTOSET.
To change the software language, follow the steps
below:
1- Open the ini setting file located under
C:\AUTOSET
2- Find the language line in the ini file (Figure 24)
3- Change the number after the equal sign to
select the language as following:
• For English, Language = 0
• For Spanish, Language = 1
• For French, Language = 2
4- Save and close the ini file
15
EN
AutoSet Plus
P R O D U C T M A N UA L
Figure 24