Display Language Option; Rain Sensor Operation - Irritrol IBOCPlus Guide D'utilisation

DISPLAY LANGUAGE OPTION

Use this feature to select either Spanish or English display prompts.
By default, English display prompts will be shown.
To change the display language:
1. Ensure the function dial is in the
2. Press the
NEXT
3. Press the + /
ON
4. Return the function dial to the
the next button to continue.

RAIN SENSOR OPERATION

Use this feature to enable/disable rain sensor operation mode for each
program.
Important: A rain sensor device must be properly connected to the
controller Rain Sensor terminals before sensor operation is enabled
for an automatic watering program. If a rain sensor is not installed
and the rain sensor operation is enabled, automatic watering for the
program will NOT occur. By default, rain sensor operation is
disabled for all programs.
To select the rain sensor mode:
1. Ensure the function dial is in the
2. Press the
NEXT
3. Select the program by pressing Program button
4. Press the + /
ON
operation for the selected program.
5. Repeat steps 3 and 4 as required to set rain sensor operation for
additional programs.
6. Return the function dial to the
Programming the Controller
OPTIONS
button to display "Language".
button to select the desired language.
AUTO RUN
OPTIONS
button as required to display "Rain Sensor."
button to enable or –/
AUTO RUN
position.
position if finished or press
position.
or .
,
A B C
button to disable sensor
OFF
position when finished.
7