Wilo Stratos GIGA2.0-I Notice De Montage Et De Mise En Service page 174

en
Application
Heating
Cooling
Heating & cooling
Drinking water
Basic control modes
Fig. 39: Application selection
Application
Heating
Cooling
Heating & cooling
Drinking water
Basic control modes
Fig. 40: Example – "Heating" application
System type
Radiator
Underfloor heating
Ceiling heating
Fan heater
Concrete core heating
Hydraulic shunt
Fig. 41: Example – "Radiator" system type
Control mode
Differential pressure Δp-v
Dynamic Adapt plus
Hall temperature T-const
Fig. 42: Example – "Dynamic Adapt plus"
control mode
174
Selection via the application
In the "Settings" menu , select the following in turn:
Menu for adjusting
pump functions
1. "Set control mode"
2. "Setting assistant"
Possible application selection:
The "Heating" application is used as an example.
Select the "Heating" application by turning the operating button and press to confirm.
The pump is used to
Different system types are available depending on the applications.
supply
heat.
The following system types are available for the "Heating" application:
System types for heating application
‣ Radiator
‣ Underfloor heating
Settings help
‣ Ceiling heating
‣ Fan heater
‣ Concrete core heating
‣ Hydraulic shunt
‣ Differential pressure-less distributor
‣ Buffer heating
‣ Heat exchanger
‣ Heat source circuit (heat pump)
‣ District heating circuit
‣ Basic control modes
Table 19: Selection system type for heating application
Example: "Radiator" system type
Select the "Radiator" system type by turning the operating button and press to confirm.
Pump supplies
Different control modes are available depending on the system type.
radiators.
For the "Radiator" system type in the "Heating" application, the following control modes are
available:
Control mode
‣ Differential pressure ∆p-v
Settings help
‣ Dynamic Adapt plus
‣ Hall temperature T-const
Table 20: Selection of control mode for radiator system type in the heating application
Example: Control mode "Dynamic Adapt plus"
Select "Dynamic Adapt plus" control mode by turning the operating button and press to con-
firm.
Pump adjusts its
performance automatically to
the
variable
demand of the
radiators
without the input of a setpoint.
Settings help
Installation and operating instructions • Wilo-Stratos GIGA2.0-I, Wilo-Stratos GIGA2.0-D • Ed.02/2022-07