Télécharger Imprimer la page

Güde TK 2400 ECO Mode D'emploi page 21

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
The manufacturer shall not be made liable for damages if general rules and this manual regulations are not observed.
Residual Hazards and Protective Action
Mechanical Residual Hazards
Hazard
Cutting, incision
Catching, winding
Electrical Residual Hazards
Hazard
Direct electrical contact
Indirect electrical contact
Noise Hazards
Hazard
Impaired Hearing
Materials and Other Substances Hazards
Hazard
Contact, aspiration
Human Factors Neglect
Hazard
Negligent use of personal
protection equipment
Inadequate local lighting
Other Hazards
Hazard
Thrown away articles and
splashes
Disposal
Disposal instructions are given by pictographs on the unit or packaging. For meaning of individual symbols refer to chapter "Symbols
on Unit".
Description
Risk of injury caused by rotating
parts
A contact with rotating band
may cause severe injuries .
Loose-fitting clothes, jewels or
long hair may be caught by
moving parts.
Description
Defective cable or plug may
cause an electrical shock
Wounds cause by conductive
parts on open electrical or
defective structural parts.
Description
Prolonged work with the saw
may result in hearing
impairment
Description
Lungs may be affected by great
amount of dust being formed.
Health-hazardous sawdust
emissions form operations
without extracting the dust .
Description
Operating the unit without
adequate PPE may cause
severe external/internal injuries
Insufficient light is a heavy
safety risk.
Description
The band or mechanical
particles may wound your eyes
in the course of cutting job.
Protective action
Be careful with small pieces to
be worked. Always use a sliding
guide bar included in the
delivery .
Never touch the saw band while
it is moving
Wear tight-fitting garments and
no jewels. Protect your hair with
a hairnet .
Protective action
Have the defective cable/plug
exchanged by a professional.
Use the unit only if connected
via a faulty current switch (FI).
Always unplug before any
maintenance.
Operate only with FI switch
installed.
Protective action
Always wear ear protectors
Protective Action
Always wear breathing mask
when working with the unit.
Install and use an exhaust
equipment.
Protective Action
Always wear prescribed
protective clothing and work
considerately.
Provide for sufficient lighting
Protective Action
Always wear protection
goggles.
21
Residual hazards
Worn or damaged aids should be
replaced immediately
Residual hazards
Residual hazard
Residual Hazards
Residual Hazards
Residual Hazards

Publicité

loading

Ce manuel est également adapté pour:

55166