Counter-Plate; Dust Protection Frontal Shield; Maintenance; Sunshield Removal - Videotec NVX220W01A Manuel D'instructions

11.6 Counter-plate

The counter-plate can be used for wall or ceiling
assembly, even for channel applications. The four
holes with bigger centre to centre distance give
higher mechanical strength.
Fig. 39
UEAW.
11.7 Dust protection frontal
shield
Fig. 40 NVXTUB.
MNVCNVX_2110_EN

12 Maintenance

Before doing any technical work on the
device, disconnect the power supply.
CAUTION! Device installation and
maintaining must be performed by
specialist technical staff only.

12.1 Sunshield removal

The product is supplied with the sunshield already
installed.
For installation or maintenance needs, the sunshield
can be dismantled. Unscrew the sunshield screws and
remove it.
Re-assemble the sunshield before fastening the
camera to the camera support.
Pay attention to the fixing. Tightening
torque: 4Nm (±0.5Nm).
Fig. 41
25