Completion Of The Machine - Gaspardo ALITALIA Emploi Et Entretien

ENGLISH

3.4 COMPLETION OF THE MACHINE

If the assembled machine is too large, some units may be disassembled from the machine. These units, which are placed inside the
same package, are the lights kit and warning boards, the rear seed-covering harrow. Install these parts as instructed below and tighten
the supplied screws according to the tightening torques indicated, as shown in Table 2 on page 48.
REAR SEED-COVERING HARROW AND LADDER (Fig. 8)
SEED-COVERING HARROW AND LADDER applications con-
fi gured with COREX discs and rear wheel (Fig. 9)
56 - EN
USE AND MAINTENANCE
Fig. 8
1
2
3
Fig. 9
19 cm
8,5 cm

DANCER ARM LIMITER FOR REAR SEED-COVERING HAR-
ROW (OPTIONAL) (Fig. 10)
Fig. 10
5
13 cm
14,5 cm
cod. G19503391