Controls, Alarms And Indicators; Comfort Controls - GETINGE Arjohuntleigh Bari-Breeze Notice D'utilisation

5. Controls, Alarms and Indicators

Controls and Indicators
Comfort Control
(Soft)
Turn Time
Button/Indicator
Max Flow
(Fast Inflate)
Standby
Power/Standby
Max Flow

Unless deactivated, Max Flow will remain active for 15 minutes, during this
time an audible warning will sound every three minutes. After this, the
comfort level will revert to the previous setting, and remain in Static mode.
Turn Options
When the pump has power but is in Standby mode, the
7 segment LED display will show a single bar.
Press the Power/Standby button to turn the pump on.
Press to enable maximum air flow from the pump.
A blue LED on the button will indicate that
active.
If ' ' is selected when the system is operating
Max Flow F
in mode then
Turn Turn
indicator will show
The button selects the turn settings of the mattress.
Each press of the button selects the next setting. For
instance, to change the mattress from
to ( ) position, press the button twice until
( )
Static
is selected.
In ) mode the right air cushions in the
Left Turn (
mattress will be held at a constant high pressure, and the
left air cushions will be held at a constant low pressure.
This process is reversed for the
When is selected, the system will alternate between
left and right turn, stopping in the central position.
9
LED Display
Turn Angle
Button/Indicator
Turn Options
Button/Indicator
Lock Out Button/Indicator
Power/Standby
mode will be deselected and the
.
Bi-lateral Turn
Right Turn (
Comfort Control
(Firm)
is
Max Flow
) mode.