Fisher & Paykel DCS BH1-48RS Guide D'utilisation page 15

Built-in Construction Details
Standard layout for cavity including insulated jacket
Note: the enclosure should have
ventilation holes to prevent gas
build-up in the event of a leak.
Refer to ANSI Z21.58 Standard for
Outdoor Cooking Gas Appliances,
Section 1.7 Enclosures For Self
Contained LP-Gas Supply Systems.
CAVITY DIMENSIONS
Maximum height of enclosure shell
A
Depth of enclosure shell
B
Minimum depth for hood swing
C
Width of enclosure cavity
D
Height of enclosure cavity
E
Depth to gas supply opening
f
Height of opening for access doors/drawers
G
Width of opening for access doors/drawers
H
ACCESS DOORS ACCESS DRAWERS
MODEL NUMBER MODEL NUMBER
ADN1-20x48 ADR2-48
ADN1-20x36 ADR2-36
ADN1-20x30 ADR2-30
ADN1-20x24 ADR2-24
To order access drawers or doors, please visit www.dcsappliances.com for further details.
INSTALLATION
D
F
E
H
G
FIG. 05
CAVITY WIDTH CAVITY HEIGHT
Inches (mm)
46 (1168)
34 (864)
28 (711)
22 (559)
C
Note: 4x4" (102mm x 102mm)
opening for gas supply line.
B
A
Note: the cut-out of
each corner should be a
90°angle in order for the
access doors/drawers to
fit properly.
BH1-48R
Inches (mm)
1/2
35 (902)
3/4
23 (603)
3/4
18 (476)
5/8
51 (1318)
1/8
11 (283)
1/2
18 (470)
20 (508)
46 (1168)
Inches (mm)
20 (508)
20 (508)
20 (508)
20 (508)
EN
BH1-36R
Inches (mm)
1/2
35 (902)
23 3/4 (603)
18 3/4 (476)
40 1/2 (1029)
1/8
11 (283)
1/2
18 (470)
20 (508)
34 (864)
13