Installer Checklist - Fisher & Paykel DCS BH1-48RS Guide D'utilisation

Installer Checklist

Specified clearances
maintained to
combustibles.
Verified proper enclosure
ventilation.
All internal packaging
and any adhesive residue
removed. To remove
stubborn residue, use
rubbing alcohol or a
commercially available
adhesive remover.
Removed shipping bracket.
Knobs turn freely, bezels
centered.
Contact DCS at www.dcsappliances.com if any of the listed items are missing. Please be prepared
with your model #, serial # and description of item(s) that are missing.
IMPORTANT!
Read all installation instructions in this manual to see if the unit has been correctly installed. Ensure
that installation has been completed correctly before use.
20
INSTALLATION
Each burner lights
satisfactorily - individually
or with adjacent burner lit.
Air shutters adjusted.
Low flame setting
satisfactory.
Drip pan in place properly
and sliding freely.
Pressure regulator
connected and set for 4.0"
C.E. Natural, 11.0" C.E. LP
gas.
Manual shut-off valve
installed and accessible.
Unit tested and free of
leaks.
User informed of gas
supply shut-off valve
location.
All radiant trays are
assembled and put in place.
Check match lighting.
Please leave these
instructions with the user.
User, please retain these
instructions for future
reference.
Tag location of
model # and serial #