Commissioning; General Remarks; Overview; Symbols Used - Fronius VarioStar 1500 Instructions De Service

Commissioning

General remarks

Overview

The section on commissioning deals with the following activities:
-
-
-
-
-
-

Symbols used

Important! Depending on your machine version, the main switch and mains supply can
be designed differently. The following symbols generally mean:
WARNING! An electric shock can be fatal. If the machine is connected to the
mains electricity supply during installation, there is a high risk of very serious
injury and damage. Only carry out work on the machine when
- the mains switch is in the "O" position,
- the machine is unplugged from the mains.
Checking the mains voltage
Fitting the welding torch and connecting the gas cylinder
Inserting/replacing feed rollers
Inserting the wirespool/basket spool
Feeding in the welding wire
Adjusting the brake
Switch off machine
Unplug machine from the mains
Connect machine to the mains
Switch on machine
9